BS ISO BRITISH STANDARD 1984-1:2001 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy- correct Version Part l: Machines with horizontal spindle London /of University icensed ICS 25.080.20 BSI NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS IS0 1984-1:2001 National foreword This British Standard reproduces verbatim IS0 1984-1:2001 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/1, Machine tools, which has the responsibility to: aidenquirerstounderstandthetext; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; f14Jan2023. monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. 0. Cross-references Version correct as The British Standards which implement international publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index", or by using the “Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Royal Holloway University of London. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having beenpreparedunderthe Summary of pages direction of the Engineering Sector Committee,was This document comprises a front cover, an inside front cover, the IsO title page, published under the authority pages ii to iv, pages 1 to 23 and a back cover. oftheStandardsCommittee Candcomesintoeffecton The BSI copyright date displayed in this document indicates when the 15August2001 document was last issued. Amendments issued since publication Amd. No. Date Comments CBSI08-2001 ISBN 058037575 7 ISO INTERNATIONAL STANDARD 1984-1 First edition 2001-06-01 Version correct as of 14 Jan 2023. Test conditions for manually controlled milling machines with table of fixed height Testing of the accuracy - Part 1: Machines with horizontal spindle University of London. Conditions d'essai des machines a fraiser a table de hauteur fixe a commandemanuelle-Controle de la précision- Partie1:Machinesabrochehorizontale Licensed copy: Royal Holloway Reference number ISO 1984-1:2001(E) ISO @ ISO 2001