BS ISO 25297-2:2011 BSl Standards Publication Optics and photonics - Electronic exchange of optical data Part 2: Mapping to the classes and properties defined in ISO 23584 bsi. ..making excellence a habit BS ISO 25297-2:2011 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 25297-2:2011. The UK participation in its preparation was entrusted to Technical Committee CPW/172/1, Optics and Photonics -Fundamental Standards. A list of organizations represented onthis committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @TheBritishStandardsInstitution2012 ISBN978 0580675973 ICS 37.020 Compliance witha British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2012. Amendments issued since publication Date Text affected BS ISO 25297-2:2011 INTERNATIONAL ISO STANDARD 25297-2 First edition 2011-12-15 OpticsandphotonicsElectronic exchange of optical data - Part 2: Mapping to the classes and properties definedinISO 23584 OptiqueetphotoniqueTransfertélectroniquedesdonnées optiques Partie2:Mappagedesclassesetproprietesdefiniesdans lisO23584 Reference number ISO 25297-2:2011(E) @ISO2011 BSISO 25297-2:2011 ISO 25297-2:2011(E) COPYRIGHTPROTECTEDDOCUMENT ISO2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, IsO's member body in the country of the requester. ISO copyright office Casepostale 56.CH-1211Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ Iso 2011 - All rights reserved BS ISO25297-2:2011 ISO 25297-2:2011(E) Contents Page Foreword iv 1 Scope.. 2 Normativereferences.. 3 Terms and definitions.. 4 Mapping.. 4.1 General. 4.2 Mapping table Annex A(informative)Class hierarchy. 22 Bibliography.... @ ISO 2011 - All rights reserved ili BS ISO 25297-2:2011 ISO 25297-2:2011(E) Foreword (isO member bodies). The work of preparing International Standards is normally carried out through IsO technical committees. Each member body interested in a subject for which a technical committee has been InternationalElectrotechnicalCommission(lEC)onallmattersofelectrotechnicalstandardization. International Standards are drafted in accordance with the rules given in the ISO/lEC Directives, Part 2. adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75%of thememberbodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. ISO 25297-2 was prepared by Technical Committee ISO/TC 172, Optics and photonics, Subcommittee SC 1, Fundamental standards ofopticaldata: Part1:NODIFinformationmodel Part2:Mappingtotheclassesandpropertiesdefinedin/SO23584 iv ISO 2011 - All rights reserved BS ISO 25297-2:2011 INTERNATIONALSTANDARD ISO25297-2:2011(E) OpticsandphotonicsElectronicexchangeofopticaldata- Part 2: Mapping to the classes and properties defined in isO 23584 1 Scope This International Standard specifies the relationship between the terms used in IsO 25297-1 and the properties defined inIsO 23584-2, and provides the means tofacilitate the use of both standards. NOTE This International Standard does not define all attributes of properties in IsO 23584-2. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. model ISO23584-1,Optics and pho