论文标题
部分可观测时空混沌系统的无模型预测
Accurate Cooperative Sensor Fusion by Parameterized Covariance Generation for Sensing and Localization Pipelines in CAVs
论文作者
论文摘要
储层计算是预测湍流的有力工具，其简单的架构具有处理大型系统的计算效率。然而，其实现通常需要完整的状态向量测量和系统非线性知识。我们使用非线性投影函数将系统测量扩展到高维空间，然后将其输入到储层中以获得预测。我们展示了这种储层计算网络在时空混沌系统上的应用，该系统模拟了湍流的若干特征。我们表明，使用径向基函数作为非线性投影器，即使只有部分观测并且不知道控制方程，也能稳健地捕捉复杂的系统非线性。最后，我们表明，当测量稀疏、不完整且带有噪声，甚至控制方程变得不准确时，我们的网络仍然可以产生相当准确的预测，从而为实际湍流系统的无模型预测铺平了道路。
A major challenge in cooperative sensing is to weight the measurements taken from the various sources to get an accurate result. Ideally, the weights should be inversely proportional to the error in the sensing information. However, previous cooperative sensor fusion approaches for autonomous vehicles use a fixed error model, in which the covariance of a sensor and its recognizer pipeline is just the mean of the measured covariance for all sensing scenarios. The approach proposed in this paper estimates error using key predictor terms that have high correlation with sensing and localization accuracy for accurate covariance estimation of each sensor observation. We adopt a tiered fusion model consisting of local and global sensor fusion steps. At the local fusion level, we add in a covariance generation stage using the error model for each sensor and the measured distance to generate the expected covariance matrix for each observation. At the global sensor fusion stage we add an additional stage to generate the localization covariance matrix from the key predictor term velocity and combines that with the covariance generated from the local fusion for accurate cooperative sensing. To showcase our method, we built a set of 1/10 scale model autonomous vehicles with scale accurate sensing capabilities and classified the error characteristics against a motion capture system. Results show an average and max improvement in RMSE when detecting vehicle positions of 1.42x and 1.78x respectively in a four-vehicle cooperative fusion scenario when using our error model versus a typical fixed error model.
